Venetian Blinds Dubai, Abu Dhabi and Al Ain :- How to Install Venetian Blinds ?
You have decided to replace your old curtains and you want them replaced with Venetian Blinds. Your old blinds are looking old and tattered and do not match the design of your new living room. The thought of all this work can be overwhelming. What do you do? You may consider hiring a professional to help you with your new Venetian Blinds installation.
Step One:
The first thing you will need to decide is whether or not you want to purchase new Venetian Blinds or retro-fit old Venetian Blinds into your new windows. You will need the size of the frame opening that is available, the width and height of your window frames, and the size of your Roman blinds or cellular shades. When installing Venetian Blinds, simply measure the dimensions of your window frames and divide by 2.5. The difference, in inches, would be the minimum vertical length you should allow for your blinds to dangle.
Where to buy roller blinds? Now, measure your window frame opening again, but this time, add one-half inch onto the end of the measurement. Add this to your current Roman blind height and width. This will give you the extra width you'll need for the Venetian Blinds to dangle. Once you have these numbers, you can either purchase new Venetian Blinds that come equipped with the needed width and height, or buy some cheap plastic or wooden support bars to use as a brace on your Roman blinds. These support bars will keep your blind hanging correctly.
Step two:
Place the Venetian Blinds onto the brackets and slide the brackets over the blinds. Make sure that all the Venetian Blinds is properly centered with the brackets, and check to make sure that the slats open and close correctly. If not, simply switch to a new Venetian Blinds abu dhabi track. You may need to adjust the slats to a correct angle. Once you've installed all the slats, screw the track firmly into place.
Step three:
To make sure your installation is completely secure, attach a cord to the tracking and make sure it's attached securely. If it doesn't fit snugly, or if you're unable to tie the cord, simply remove the brackets and re-attach them. Now you're ready to hang your Best Venetian Blinds! Before actually hanging the blinds, make sure the cords are secure and that the cords run directly out from the track. If you install safety device devices, make sure they're installed the same way so that the lights also operate from the same location as well.
Step four:
The last step of installing your Venetian blinds is simply pinning the pencil into each hole. This can take some time, depending on the size and intricacy of your blind. However, it's worth the time because it ensures that the pencil will be held in each hole for the entire life of your blind. There are many ways you can pin your pencils into the holes, such as through the holes themselves, using needle nose pliers, or by inserting both needles and pins into the holes until the pencil slips through easily. After you've installed your pencil into the appropriate holes, screw the blind onto its brackets and enjoy your new blind.
Abudhabicurtains.ae
Call Us For FREE APPOINTMENT To Check Out Our PVC And Vinyl Flooring Solutions !! Call Now (00971)56-600-9626, 0566776789, 042959449 or Email: info@abudhabicurtains.ae
Visit here for more details: https://abudhabicurtains.ae/
Our Google map location for Abu Dhabi:
https://goo.gl/maps/gZ139S1rRzJcDMdZ7
Follow us on
Facebook : https://www.facebook.com/Abu-Dhabi-Curtains-102657627931203
Twitter : https://twitter.com/AbuCurtains
Linkedin : https://www.linkedin.com/company/14604939/admin/
Pinterest: https://in.pinterest.com/abudhabicurtains33/
We serve our clients across UAE in Dubai, Abu Dhabi, Sharjah,Al Ain, Ajman, Al Fujairah and Umm al Quwain
Read more :
https://blindshop666.blogspot.com/2021/06/ready-made-blinds-dubai-abu-dhabi-and.html
Comments
Post a Comment